Skip to main content

Wialon IPS

Status: Works today: built into ZAITRACK for every organisation.

KindVersionPublisherLicence
Device codec1.0.0ZAITRACKApache-2.0

What it does​

Wialon IPS 1.1 and 2.0: the text protocol of many trackers and of Wialon's own retranslation, so units on a Wialon server reach the platform without touching the devices. Logins, short and full data with inputs, outputs, ADC, iButton and named parameters, black boxes (records stored out of coverage) and pings; CRC-16 checked for supported telemetry in 2.0. This implementation exposes no outbound command encoders.

  • Devices: vehicle_tracker
  • Transport: tcp, udp
  • Commands: None.
  • Capabilities: telemetry.position

How to use it​

Built in: register the device in the console and choose its protocol. Where it connects, and its settings: https://docs.zaitrack.app/fleet/connect/wialon-ips.

Its listing: https://marketplace.zaitrack.app/browse/wialon-ips.

Configuration​

None: built in, it has no settings of its own; a device's own settings are on its Connect page.

Credentials​

None.

Limits​

Built in, it runs inside codec-runtime itself today. These are the limits it asks for as a WASM module in codec-runtime's sandbox:

  • Memory: 32 MB
  • Time per call: 100 ms
  • Instructions per call (fuel): 2,000,000,000
  • Largest message: 65,536 bytes
  • Calls per second: 8,000
  • Network: no network access
  • Its own key-value store: up to 1,024 keys of 4,096 bytes

Troubleshooting​

  • The device does not connect. Check the host and port its Connect page gives for your region, that the SIM has data and the APN is set, and that the device sends to that host (some send to the last server they were given).
  • It connects but no position arrives. The device must be registered with this protocol and the IMEI or serial it reports: a device the platform does not know, or a retired one, is refused when it connects. Trackers shows it as Check (never reported) until its first position.
  • Positions arrive with the wrong time. The protocol's timestamps are UTC; a device set to local time reports hours off. Set it to UTC.
  • A command does not reach the device. Only the commands listed under Commands are sent; the device must be online, and some models need the command enabled in their own configuration.

Source​

adapters/codecs/wialon-ips